Made in Germany since 1867. GRIT modular belt grinding, stainless finishing, cold cutting and the VersaMag magnet vise.
GRIT belt grinding — modular system. Buy a base unit, add the module the job needs.
| Model | What it is | Belt | Power | Speed | Weight | |
|---|---|---|---|---|---|---|
| GRIT GX 75 2H | Belt grinder base unit, 2-speed, three-phase | 75 × 2000 mm | 1.5 / 2 kW | 1500 / 3000 rpm | 75 kg | PDFQuote |
| GRIT GXR | Notch grinding unit — pipe Ø16–75 mm, profile to 75 × 75 mm, angle to 90° | 75 × 2250 mm | module | — | 54 kg | PDFQuote |
| GRIT GIMS 150 | Mobile carriage — grinds weld seams at floor level, standing | 150 × 2000 mm | 4 kW | — | 110 kg | PDFQuote |
| GRIT GHB 15-50 | Hand-guided belt grinder — the alternative to an angle grinder | 50 × 1000 mm | 1.5 kW | 8500 rpm | 5.6 kg | PDFQuote |
| GRIT GHBM | Mobile surface treatment module — roller guide for long welds | 2 × 1000 mm | module | — | 5 kg | PDFQuote |
Stainless steel finishing, cutting and workholding
| Model | What it is | Capacity | Power | Speed | Weight | |
|---|---|---|---|---|---|---|
| KS 10-38 E | Fillet weld sander — flat 33 mm head, swivel drive | Corners, angles, tight spots | 800 W | 1350–3750 rpm | 3.2 kg | PDFQuote |
| RS 17-70 E | Pipe sander — 360° peripheral sanding in two steps | Stainless pipe to Ø80 mm, incl. bends | — | Variable | — | PDFQuote |
| WPO polisher sets | Satin, brushed and mirror finishing on stainless | Expansion roller, sleeves, fleece wheels | — | Variable | — | PDFQuote |
| MKAS 355 | Metal chop saw — cold cut, up to 100% non-sparking, 0–45° mitre | Cutting depth to 120 mm · blade Ø355 mm | 230 V | 1300 rpm | 24.4 kg | PDFQuote |
| VersaMag | Permanent magnet vise — clamps to the workpiece, not a bench | Jaw 100 mm · range 102 mm · holding force >7800 N | — | — | <8.5 kg | PDFQuote |
| Dustex 25 L | Wet / dry extractor, dust class L, 67 dB | 22 l tank · 4320 l/min · 253 mbar | 1380 W | — | 8.0 kg | PDFQuote |
| Dustex 35 L | Wet / dry extractor, dust class L, 67 dB | 32 l tank · 4320 l/min · 253 mbar | 1380 W | — | 9.0 kg | PDFQuote |
The GRIT system is modular. A GX 75 2H base unit plus the GXR module turns one machine into a pipe notcher. Tell us what you fabricate and we will specify the base unit and only the modules you actually need. Ask us →
FEIN has been building metalworking tools in Germany since 1867 — they invented the handheld electric drill. What separates a FEIN tool from a general-purpose brand is duty cycle: these are built to run hard, all shift, every shift.
The GRIT system is modular. One GX 75 2H base unit plus the GXR module becomes a pipe notcher; add GHBM and it treats large surfaces. You buy the base once and extend it as the work changes, instead of buying a separate machine each time.
Typical work: architectural stainless · food, dairy and pharmaceutical equipment · handrails and balustrades · tube and frame fabrication · pressure vessels · motorsport · shipbuilding and repair.
Material, thickness, quantity and delivery location are all we need to begin. We represent seven authorised brands, so the recommendation you receive is the one the job calls for.